What is the typical vertical height of a chandelier when mounted above a table?

1. Generally, when the home chandelier is installed above the table, the vertical distance between the chandelier and the table should not be less than 0.5 meters. The distance between the chandelier and the table is generally between 1.5 meters and 1.8 meters, which is a more appropriate distance.

2. The vertical distance between the chandelier and the ground is generally about 2.5~2.8 meters. The size of the chandelier can be selected according to the actual situation in the room.

Notes on installation of chandeliers:

1. If the weight of lamps and lanterns such as ordinary hanging wires is less than 1 kg, they can be directly hoisted with flexible wires. If they are more than 1 kg, they need to be hoisted by suspending chains.

2. When using a cord chandelier, make a knot in the hanging box and the lamp holder. When using steel pipe as the hanger of the lamp, the inner diameter of the steel pipe is generally not less than 10 mm. Where the weight of lamps exceeds 3 kg, the connection with the ceiling needs to be pre-buried hooks or bolts. For fixed hooks, the diameter of the round steel shall not be less than 6 mm.

3. When using a special winch to suspend and fix a large chandelier, it should be done: the ratchet of the winch needs to have a locking device; the tensile strength of the wire rope of the winch should not be less than 10 times the weight of the lantern. Lighting installation requires protection against electric shock. When the metal shell of the luminaire needs to be grounded, it should be connected to the grounding grid by the grounding bolt.

4. When the lamp adopts a screw cap, the phase wire should be connected to the top center of the lamp cap, and the neutral wire should be connected to the screw. Garden lights should be fitted with fuses. Installation of light fixtures requires flame resistance. When all kinds of lamps are installed in flammable structures or in wooden ceilings, fire prevention or heat insulation treatment should be carried out around the lamps. Tungsten halogen lamps cannot be ceiling mounted on wood or other flammable materials. The installation of lamps and lanterns should match its own lines with the interior architectural lines. The side of the rectangular luminaire should be parallel to the decoration line of the ceiling. When the lamps are installed symmetrically, their vertical and horizontal central axes should be on the same straight line. A switch-on light fixture with a combination of multiple fluorescent lamps. The lamps should be arranged neatly.

(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)